FPE Electrical Panels in a Quebec Condo: What to Do?
In many divided co-ownership buildings in Quebec, Federal Pacific Electric (FPE, “Stab-Lok”) or Zinsco electrical panels are still found in some units. These systems have a reputation for potential failures, particularly circuit breakers that do not trip properly, which can increase the risk of overheating and fire. For a board of directors (the board) and co-owners, knowing what to do is crucial. The topic of “FPE electrical panels Quebec condo” often comes up in our discussions with syndicates in the Greater Montreal area.
This article explains the risks, the responsibilities relating to common portions and private portions, and the concrete steps to assess and, where necessary, plan a safe and compliant replacement. It also covers key considerations relating to insurance, project management and communication at the AGM, with rigorous follow-up in the minutes.
FPE/Zinsco in brief: why these panels are a problem
FPE (Stab-Lok) and Zinsco are older brands, often installed in buildings constructed between the 1960s and 1980s. Several inspection reports in North America have identified failure rates above normal. The typical problem? A circuit breaker that does not trip during an overload, leaving the circuit energized and increasing the risk of damage or fire.
In a co-ownership, the presence of these panels in units can complicate real estate transactions, increase insurance premiums or create special requirements from insurers. Buyers, notaries and real estate brokers are now asking for confirmation of the panel type before an offer to purchase is made. The board must therefore be ready to respond with up-to-date, traceable information.
Who pays for what? Declaration of co-ownership, common portions and private portions
The key is found in the declaration of co-ownership and its descriptions of the common portions and private portions. As a general rule:
- Risers, central meters, main electrical services and common distribution systems are part of the common portions.
- An electrical panel located inside a unit is often a private portion, but exceptions may apply depending on the declaration of co-ownership.
The syndicate, through the board, has an obligation to ensure the preservation and safety of the building (see section 1039 C.C.Q.). If common components present a risk, it must intervene and plan the work. When the risk is located in a private portion, the responsible co-owner must correct it, subject to the building’s rules and applicable safety requirements.
With respect to financing, replacements affecting the common portions are normally planned through the contingency fund and long-term maintenance planning (maintenance logbook), with or without a special assessment depending on the budget (see section 1072 C.C.Q.). For panels inside units, the cost generally falls to the co-owner, unless a provision of the declaration of co-ownership or a valid resolution of the meeting provides otherwise.
The board may regulate the work through the building’s rules, including by requiring:
- Replacement of FPE/Zinsco panels within a reasonable time frame.
- Installation standards and approved brands.
- Proof of compliance and insurance from the licensed contractor.
Before imposing such measures, consult your legal counsel to ensure compliance with the declaration of co-ownership, the Civil Code of Québec and the voting thresholds applicable at the AGM. Record the decision in the minutes and communicate it clearly to the co-owners.
Identify and confirm: are you affected?
Here is a simple process for identifying the presence of FPE/Zinsco panels in your building:
- Check the year of construction and major renovations. Buildings from the 1960s to the 1980s are at greater risk.
- Ask co-owners to report the panel brand (interior label, “Stab-Lok” circuit breakers, characteristic Zinsco bus bar). Provide a basic visual guide.
- Consult your maintenance logbook. Some co-ownerships have already recorded occasional replacements over the years as units were sold.
- Engage a master electrician to validate a sample or complete a full inventory. The contractor must hold the appropriate RBQ licence for electrical work.
For any electrical work, make sure you hire a contractor holding the appropriate licence subcategory, and require certificates of compliance with the Code and the RBQ.
- LégisQuébec – Civil Code of Québec: preservation of the building (see section 1039 C.C.Q.)
https://www.legisquebec.gouv.qc.ca/fr/document/lc/CCQ-1991 - LégisQuébec – Contingency fund (see section 1072 C.C.Q.)
https://www.legisquebec.gouv.qc.ca/fr/document/lc/CCQ-1991 - RBQ – Electrical work and licences
https://www.rbq.gouv.qc.ca/domaines-dintervention/electricite - RGCQ – Resources for syndicates of co-owners
https://rgcq.org/fr/ressources
Replace or tolerate? Risk assessment, insurance and work schedule
Tolerating an FPE/Zinsco panel can expose the building to insurance issues. Many insurers require replacement as a condition of coverage, especially after a loss or when updating a policy. Your broker may ask for a plan with a schedule, particularly if the building has a significant number of high-risk panels.
Here is how to structure an informed decision by the board:
- Technical assessment. A master electrician prepares a report identifying the brands, condition and possible temporary measures. Thermography may support the diagnosis.
- Legal analysis. Review the declaration of co-ownership, responsibilities and procedures for accessing units. Include an access clause for emergencies and safety work.
- Insurance coverage. Obtain the syndicate’s insurer’s position in writing and, if necessary, recommend that co-owners consult their own insurer.
- Communication and consent. Announce the plan in advance, answer frequently asked questions and clarify who pays for what.
Budget, contingency fund and assessments
If common components are affected (electrical services, distribution equipment, cable routes), incorporate the project into the maintenance logbook. Update your financial plan and, where applicable, adjust the common expenses. For work that is the responsibility of the units, establish minimum requirements: an approved contractor, a realistic deadline and proof that the work was completed filed with the syndicate.
When significant costs for the common portions are involved, the board may propose a budget resolution at the AGM. Avoid underestimating the costs; electrical work in an occupied building requires coordination and access periods. Document decisions in the minutes to ensure traceability.
Operational planning and access to units
Electricity affects both comfort and safety. Schedule work by floor, with time slots communicated in advance. Establish a protocol for units that cannot be accessed on the first visit, and provide clear communications about temporary power outages.
- Written notice with work windows and emergency contacts.
- Validation of materials approved by the syndicate.
- Spot checks by the responsible electrician and submission of certificates.
Keep the documents in the syndicate’s files and add the information to the maintenance logbook.
Selling a condo: disclosures, notary and OACIQ
When a unit is sold, the parties will want to know whether its panel is an FPE/Zinsco brand. The Seller’s Declarations form used in real estate brokerage requires information about electrical systems. A notary may also raise the issue when reviewing the syndicate’s documents.
- OACIQ – Seller’s Declarations
https://www.oaciq.com/fr/pages/declarations-du-vendeur
From the syndicate’s perspective, the certificate provided to a potential buyer may include the status of known common electrical work, planned projects and any relevant resolution. If a rule requires the replacement of high-risk panels, state this clearly to avoid disputes after the transaction.
Six-step action plan for a condo board
Here is a practical approach we see in the co-ownerships we manage:
- Map the situation. Identify the units with FPE/Zinsco panels and the potentially affected common components.
- Obtain a report from a master electrician. Include photos, findings and prioritized recommendations.
- Consult the syndicate’s legal counsel. Determine the appropriate mechanism: building rule, maintenance guidelines or AGM resolution, depending on the required thresholds.
- Establish the budget. Update the maintenance logbook, contingency fund and, if necessary, assessments. Sequence the work to spread the impact on condo fees.
- Select the contractor. Require the appropriate RBQ licence, proof of insurance and references. Define a post-work certificate template.
- Communicate, carry out the work and document it. Notify the co-owners, obtain access, complete the replacements and archive the supporting documents. Record follow-up in the minutes and update the maintenance logbook.
For structured support, consult our operations and maintenance management services. We help boards plan and oversee this type of project, with a focus on compliance and communication.
- Our services – Operations management
https://www.multirent.ca/services/#gestion-des-operations - Discover our packages
https://www.multirent.ca/#forfaits - The multiRent blog
https://www.multirent.ca/blog/ - Contact us
https://www.multirent.ca/nous-joindre/
This article provides general information and does not constitute legal advice. Consult a lawyer or notary regarding your situation.
Do you manage a co-ownership in Quebec? Discover our packages or contact us to assess your needs.
