Smart Thermostats in Condominiums: Hilo and Hydro-Québec
Smart thermostats and Hilo by Hydro-Québec are attracting many co-owners who want to reduce their consumption and take part in demand-response events. In divided co-ownership, however, installing connected equipment is not a “free-for-all.” It must comply with the declaration of co-ownership, the building regulations, the Civil Code of Québec and, depending on the circumstances, decisions made by the board of directors (the board) or the AGM. Updated as of September 11, 2026, here is what is generally permitted, what requires approval and the best practices for avoiding disputes.
What the declaration of co-ownership and the Civil Code say (permissions and limits)
In most condominiums, wall-mounted thermostats for electric baseboard heaters are located in the private portions. Replacing a thermostat with a smart model is often considered routine work within your unit, but it remains subject to the declaration of co-ownership and the building regulations. The co-owner must ensure that the work does not endanger the building, alter the common portions (for example, wiring in vertical shafts) or violate electrical standards.
- Obligation to comply with the building regulations and the syndicate’s decisions (see section 1063 C.C.Q.).
- Contribution to common expenses and responsibility for repairs if the installation causes damage (see section 1064 C.C.Q.).
- The regulations may establish standards for work in the private portions when it affects safety, the structure, noise or the building’s appearance and harmony (see section 1070 C.C.Q.).
- Certain more significant decisions, if they affect the common portions or the integrity of the building, may require a vote at the AGM (see section 1097 C.C.Q.).
Official references:
Civil Code of Québec, section 1063
Civil Code of Québec, section 1064
Civil Code of Québec, section 1070 (building regulations)
Civil Code of Québec, section 1097 (significant decisions at the AGM)
In practice, a syndicate may therefore authorize smart thermostats subject to conditions (approved brands, installation by a qualified contractor, proof of compliance), and prohibit work that affects the common portions or increases risks to the building.
Hilo and smart thermostats in condominiums: technical considerations
Hilo (Hydro-Québec) offers smart equipment and coordinates demand-response events during the winter. In challenge mode, thermostats may lower the setpoint and then heat the unit again afterward. In a condominium, this creates several technical considerations.
- Compatibility: most condominiums heated by 240 V baseboard heaters require thermostats designed for these loads. Check the manufacturer’s and Hilo’s specifications (updated as of September 11, 2026).
- Network and gateway: each unit generally has its own router and Hilo gateway; Internet access is the co-owner’s responsibility, not the syndicate’s.
- Rebound peak: after an Hilo challenge, several units heating up at the same time may create a peak. In older buildings or buildings already operating near their electrical capacity, the board should consult a master electrician or engineer to determine whether controls (for example, staggering schedules) are necessary.
- Electrical work: even if a thermostat appears “easy to install,” in Québec, replacing a thermostat connected to a 240 V circuit is electrical work that must be performed by a qualified contractor holding the appropriate licence. See the RBQ: electrical installation work.
If additional wiring must pass through a shared conduit, if access to common ceilings or floors is required, or if the main panel must be accessed, this concerns the common portions. In these cases, the syndicate’s authorization is required, and the work must comply with the syndicate’s access and insurance rules.
What the board may permit, require or prohibit
The board administers the building and oversees safety and compliance. Without banning innovation, it may regulate the use of smart thermostats and Hilo through a policy or an addition to the building regulations. Examples of reasonable requirements include:
- Installation by a licensed electrical contractor, with an invoice and certificate.
- Certified models (for example, cULus), compatible with 240 V, and load limits for each circuit.
- Prohibition on modifying common-portion wiring without prior written approval.
- Proof of the contractor’s civil liability insurance and compliance with access rules for the common portions.
- A configuration that avoids excessively abrupt peaks (for example, staggered schedules during Hilo challenges if requested by the syndicate).
- Maintaining visual harmony (for example, the colour of visible wall plates in corridors, where applicable) and relay noise levels.
- Keeping a work log and documents in the unit’s file (useful for the board minutes and the maintenance/EUC history).
In a building where several co-owners adopt Hilo, the board may also consult a professional to assess maximum electrical demand and coordinate the equipment. The RGCQ recommends clear rules known to co-owners; consult its resources: RGCQ.
If the building regulations must be amended, a meeting may be required. Everything must be recorded in the minutes. If you are unsure about the level of approval required, have it reviewed by a legal professional.
Recommended approval process (5 practical steps)
To streamline requests and avoid friction, here is a typical process adopted by several syndicates:
- Review the declaration of co-ownership and the regulations: confirm that installing a smart thermostat in your unit is permitted and under what conditions (contractor, certificates, etc.).
- Submit a request to the syndicate: include a form with the selected model, technical specifications, proof of an RBQ electrical contractor and the planned date.
- Obtain written authorization: the board makes a decision within a reasonable time and, if conditions apply, sets them out in writing.
- Install and document: the work must be performed by a licensed electrician; keep the invoice, proof of compliance and, if Hilo is involved, proof of activation.
- Update the file: send the documents to the manager; the information will be added to your unit file and, where necessary, to the maintenance logbook/EUC for overall monitoring.
Need help structuring your approvals? See our operations management services and our administrative management support. You can also browse other resources on the multiRent blog.
Financial impacts, insurance and resale
- Hilo rewards: generally, rewards from Hilo challenges go to the participant (the unit) that enrols and gives up part of its consumption. The syndicate is not entitled to them, unless there is a separate collective project. Clearly explain this point to avoid misunderstandings about common expenses and condo fees.
- Insurance: if a non-compliant installation causes a loss, the co-owner may be held liable. Complying with standards and hiring a licensed contractor is therefore essential.
- Budget and expenses: widespread adoption of smart thermostats may reduce the units’ overall energy demand, but the syndicate should not rely on this when adjusting the contingency fund. The fund is based on the condition of the building, not on individual behaviour.
- Resale: adding smart equipment is often an asset, but it must be properly disclosed when the unit is sold. The OACIQ emphasizes the importance of complete and accurate seller disclosures: Seller’s Declaration.
Practical tip: if the syndicate has implemented an Hilo/smart thermostat policy, keep it with the AGM and board minutes. The notary and future buyers will appreciate having clear information about what is permitted. This avoids delays when producing a syndicate certificate.
For regulatory compliance and safety, also refer to the RBQ (electrical work) and consider the obligations under the Civil Code cited above. Best practices in co-ownership are also discussed by the RGCQ: RGCQ.
FAQ — Hilo thermostats in condominiums
Can the board prohibit Hilo in my unit?
The board may regulate the installation and, in specific circumstances, refuse it if there is a risk to the building (electrical capacity, safety, impact on the common portions) or if the declaration of co-ownership or regulations prohibit it. A general prohibition without an objective reason could be challenged. Verify the legal basis (regulations adopted in accordance with the C.C.Q.) and the reasons given.
Who receives the rewards from Hilo challenges?
Usually, the person subscribed to the service (the co-owner or the unit’s authorized occupant). The syndicate is not entitled to them by default. If a collective Hilo project were contemplated, it would require a clear structure and authorizations, decided according to the AGM rules and recorded in the minutes.
Can a tenant install smart thermostats?
Only with the co-owner’s written consent and in compliance with the syndicate’s policy. The work must be performed by a licensed electrician. The co-owner remains responsible to the syndicate for any damage and for compliance.
This article provides general information and does not constitute legal advice. Consult a lawyer or notary regarding your situation.
This article provides general information and is not a substitute for advice from a tax professional or accountant. Refer to Revenu Québec and the CRA for the exact rules.
Do you manage a condominium in Québec? Discover our packages or contact us to assess your needs.
