Quebec Condo Window Replacement: Permits and Voting
Replacing windows in a divided co-ownership always raises the same questions: who decides, who pays, is a permit required and which warranties apply? This practical guide, focused on Quebec condo window replacement, summarizes the key steps for a compliant, properly budgeted project accepted by the co-owners.
Information current as of September 16, 2026.
Windows: common portions or private portions? Start with the declaration of co-ownership and the maintenance logbook
The first step is to review the declaration of co-ownership and the plans. In most co-ownerships, windows, their exterior frames and fenestration visible from the outside are classified as common portions, sometimes as limited common portions. Interior maintenance (screens, cranks) may be charged to the occupying co-owner, while major repairs and replacement are the responsibility of the syndicate.
- Review the declaration of co-ownership and the building’s bylaws to confirm how the windows are classified (common portions versus private portions) and who is responsible.
- Check the maintenance logbook / EUC (required under Bill 16) for the condition, remaining service life and replacement planning.
- If there is any ambiguity, seek the opinion of a professional (architect, technologist or engineer) to document the condition and recommend the type of intervention.
From a legal perspective, the rules governing the management of common portions and assembly decisions are found in the Civil Code of Québec (see sections 1038 et seq., as well as sections 1096 to 1109 C.C.Q.). Consult the official source for up-to-date legislation.
- Reference: Civil Code of Québec (LégisQuébec)
Municipal permits, RBQ compliance and architectural constraints
Depending on the municipality and zone (e.g., a heritage sector), window replacement may require a permit. Even if the dimensions remain unchanged, the exterior appearance (divisions, colour, materials and opening type) is often regulated.
- Confirm with your borough or municipality whether a permit is required and which documents must be attached (specifications, plans, technical sheets and photos). Permit-issuance timelines must be incorporated into the project schedule.
- If the opening is modified (enlargement or new opening), expect structural requirements and the involvement of an engineer or architect.
- Comply with the façade’s architectural constraints: visual uniformity, preservation of muntins, and thermal or acoustic requirements set out in the building’s bylaws.
Choose a contractor that holds an RBQ licence, is insured and complies with CNESST requirements. Request references, proof of liability insurance and technical sheets (energy performance, U-factor/SHGC and acoustics) suited to your building.
- Reference: Régie du bâtiment du Québec (RBQ)
- Best practices in co-ownership: RGCQ
For your internal processes (requests for bids, coordinating access to units, work schedules and communications), see our operations management and administrative management services.
Voting, the board’s powers and the AGM
Window replacement often concerns common portions; it is therefore necessary to determine which decision-making body has jurisdiction and what approval threshold applies.
Maintenance versus improvement
- Equivalent maintenance/repair: replacing windows “like for like” or with the equivalent specified in the declaration of co-ownership or bylaws is generally considered maintenance. The board may authorize it if the item is budgeted; otherwise, assembly approval may be required for a special assessment.
- Improvement/modification: changing the material (e.g., wood to aluminium), appearance (removing divisions), performance (a significantly improved energy rating) or use may constitute an improvement. These decisions usually require a higher voting threshold at the AGM, depending on the declaration of co-ownership and the C.C.Q. (see sections 1096 to 1109 C.C.Q.).
In all cases, place the item on the agenda with the relevant documents (professional report, bid comparison and budget impacts) and attach a clear draft resolution. The minutes must record the voting result and the contractor selected.
Quorum, notice and documentation
- Follow the notice requirements (deadlines, documents and proxies) and quorum rules set out in the declaration of co-ownership and the C.C.Q.
- Use a recorded or secret ballot depending on the sensitivity of the matter and the internal rules.
- For a major project, consider holding a dedicated special meeting so that technical questions can be answered without rushing.
| Scenario | Approval required | Likely vote | Who pays |
|---|---|---|---|
| Equivalent replacement, budgeted | Board (ordinary administration powers) | Simple majority if AGM approval is required | Common expenses (undivided shares) |
| Aesthetic/energy improvement | AGM | Higher majority (depending on the declaration of co-ownership/C.C.Q.) | Common expenses; sometimes limited common portions |
| Change in dimensions/opening | AGM + permit | Higher majority | Common expenses; possible adjustment based on use |
General legal source: C.C.Q., divided co-ownership
Who pays? Contingency fund, budget and special assessments
When windows are common portions, the general rule is that major repair and replacement expenses are assumed by the syndicate and allocated according to the undivided shares (common expenses), unless the declaration of co-ownership provides otherwise. Three funding sources generally apply:
- Operating budget (minor maintenance planned in the annual budget);
- Contingency fund (major repair and replacement work involving common portions);
- Special assessment (if the schedule or costs exceed the contingency fund’s available funds, or if the project is brought forward).
Best practices:
- Align the project with the EUC/maintenance logbook (timeline, priorities and costs)
- Update the contingency fund study to calibrate the assessment and avoid financial shocks
- Determine the exact allocation if the windows are limited common portions (the declaration of co-ownership may provide for a different allocation)
To prepare the notice of meeting and budget resolution, browse our resources on the multiRent blog and our administrative services.
- Useful reference: RGCQ — financing co-ownership work
- For tax implications (e.g., sales taxes and programs), refer to Revenu Québec.
Warranties, acceptance and post-project maintenance
Accepting the work is a key step. Inspect, document and centralize the supporting evidence.
- Acceptance: prepare a deficiency list, take photos and set a correction deadline. The acceptance report must indicate the date, contractor, serial numbers (if applicable) and outstanding items.
- Warranties: retain the manufacturer’s warranties (sealed glass units, frames and hardware) and the installer’s warranty (labour). The legal warranties provided under the C.C.Q. regarding the quality and durability of the work also apply. In the event of defective work or a defect, follow the demand-letter procedure before taking any legal action.
- Maintenance: provide co-owners with a maintenance sheet (ventilation, cleaning frame drainage channels and keeping blinds clear) to preserve performance and limit fogging or condensation.
Compliance and safety:
- Verify the documentation: RBQ licence, insurance and CNESST compliance.
- Request the final technical sheets for the products installed for your records and for the EUC/maintenance logbook.
To structure acceptance and archiving (reports, warranties, photos and notices), an equipped manager makes tracking and follow-up easier.
Practical steps for a smooth project
- Confirm the classification (declaration of co-ownership), condition (professional report) and inclusion in the maintenance logbook/EUC.
- Obtain approvals: board/AGM depending on the nature of the project, with complete documentation and a draft resolution.
- Request bids: technical criteria (performance and acoustics), RBQ licence, insurance, schedule and method for accessing units.
- Municipal permit: submit the file, comply with architectural criteria and coordinate inspections if required.
- Communication plan: notices regarding access to condos, work periods, management of keys and pets, and procedures in case of absence.
- Execution and quality control: supervision, photos, recording incidents and corrections.
- Acceptance and closeout: report, deficiency list, warranties, and updates to the EUC and contingency fund.
- Regulatory reference: LégisQuébec — Civil Code of Québec
- Contractor oversight: RBQ
Quick FAQ
Can a co-owner replace “their” window on their own? If the windows are common portions (which is common), no. Authorization from the syndicate and, if necessary, an assembly decision are required. Acting alone may lead to restoration work and expenses.
Is a permit required if the window is replaced like for like? A permit is often subject to a simplified process when the appearance and dimensions do not change, but many municipalities still require one. Always confirm with your municipality before signing a contract.
Who pays when a window serves only one unit (limited common portion)? The declaration of co-ownership may provide for a specific allocation. Otherwise, the usual rule remains allocation according to the undivided shares of the common expenses. Check your declaration of co-ownership and, if necessary, consult a legal professional.
This article provides general information and does not constitute legal advice. Consult a lawyer or notary regarding your situation.
This article provides general information and does not replace advice from a tax professional or accountant. Refer to Revenu Québec and the CRA for the exact rules.
Do you manage a co-ownership in Quebec? Discover our packages or contact us to assess your needs.
