multiRent — Gestion de copropriétésmultiRent — Gestion de copropriétésmultiRent — Gestion de copropriétésmultiRent — Gestion de copropriétés
  • Services
  • Packages
  • Changing managers
  • Partners
  • Our team
  • Blog
  • Contact
  • Français
Portal
✕
27/08/2026
Categories
  • Operations Management
Tags
  • Common Portions
  • Insurance
  • Insurance Claims
  • Preventive Maintenance
  • Quebec

Fire Watch in Quebec Condominiums: When and How

By Muriel Druart, Client services director

Fire watch is a temporary human surveillance measure required when a fire protection system is out of service or insufficient. In a divided co-ownership, the syndicate and the board of directors must know when to activate it and how to operate it in accordance with the National Fire Code of Canada (NFCC), as adopted in Quebec. If you are searching for “fire watch Quebec condominium CNPI obligations,” this guide summarizes the essentials so you can act quickly and in compliance.

In the Greater Montreal area, several condominiums use fire watch during sprinkler work, an alarm failure or a pump breakdown. When properly organized, fire watch reduces risks to people and property in the common portions and private portions, while reassuring co-owners and insurers.

What Is Fire Watch and When Is It Required?

Fire watch consists of assigning one or more people to conduct regular rounds to detect any sign of fire, check that exits are clear and trigger the alarm while technical protections are being restored.

Typical condominium situations in which fire watch is required or strongly recommended under the NFCC and the Safety Code (always check with your local fire department) include:

  • Failure, shutdown or defect affecting the fire alarm system, sprinklers, dry or wet standpipes, detection systems or emergency power supply.
  • Major work in the common portions (e.g., replacement of alarm panels or modifications to sprinkler piping) that disables an essential protection system.
  • Occupancy of temporary spaces or buildings in transition (e.g., reopening after a loss) without all normal measures in place.
  • Temporary increased risks (e.g., welding or hot work) when usual prevention measures have been reduced.

The general principle of the NFCC can be paraphrased simply: if a fire protection measure is unavailable, the owner must put equivalent compensatory measures in place, including fire watch, until it is restored (see the Safety Code, Chapter VIII – Building, incorporating the NFCC, and the Fire Safety Act).

NFCC Obligations and the Syndicate’s Responsibilities

In Quebec, the applicable framework comes primarily from the Safety Code (Chapter VIII – Building), which incorporates the NFCC with Quebec-specific modifications, and the Fire Safety Act. In a co-ownership, the “owner” within the meaning of these texts is the syndicate of co-owners, represented by the board of directors.

At a high level, your key responsibilities include:

  • Keep protection systems (alarms, sprinklers and emergency lighting) in good working order at all times, and have them serviced by contractors holding the licences required by the RBQ.
  • Adopt and implement an emergency measures plan specific to the building, including fire watch procedures when systems are out of service.
  • Notify the municipal fire department without delay and, where applicable, the insurer whenever an essential system is disabled or deficient and fire watch is being implemented.
  • Keep a log of rounds and temporary measures implemented, and retain supporting documentation.

The board should also:

  • Document the decision to implement fire watch in the minutes of a meeting and promptly inform co-owners of the instructions.
  • Verify that the interventions comply with the building’s bylaws and the declaration of co-ownership (for example, access to technical common portions, keys and emergency communications).
  • Coordinate with the property manager and suppliers to minimize the duration of the outage.

Who Can Act as a Fire Watch Officer?

The NFCC does not require a specific job title, but the person assigned to fire watch must:

  • Be available exclusively for this task during their shift and able to move quickly.
  • Know the floor plans, evacuation routes and equipment locations (fire extinguishers, panels and valves).
  • Know how to recognize the start of a fire, immediately call 9-1-1 and manually activate the alarm when necessary.
  • Have reliable communication tools and a log for recording rounds.

Depending on the size and complexity of the building, a team may be needed to cover all areas, especially at night and on weekends.

Implementing Effective Fire Watch: Practical Steps

Here is an operational framework your syndicate can adapt to its circumstances:

  1. Assess the outage

    • Precisely identify the affected system (alarm, sprinklers, ventilation, generator or dry standpipes). Obtain a written report from the contractor.
    • Assess the affected areas (Towers A and B, garages, Floors 1–6). Map the area to be covered.
  2. Notify and coordinate

    • Contact the fire department to report the situation and validate the proposed temporary measures.
    • Notify the syndicate’s insurer; some insurers explicitly require fire watch when systems are out of service.
    • Inform co-owners of the instructions (e.g., a temporary prohibition on hot work in the private portions and common portions, increased caution and immediate reporting of anomalies).
  3. Organize the fire watch

    • Assign trained officers who are available 24/7 for as long as protection is reduced.
    • Plan a patrol route covering all evacuation routes, technical rooms, indoor parking, attics and electrical rooms.
    • Establish a frequency suited to the risk and configuration (more frequent at night and in higher-risk areas). Document the method.
  4. Equip the team with the right tools

    • Patrol log (paper or digital), radio/telephone, flashlight, master keys, floor plans and a list of checkpoints.
    • Clear escalation procedure (who to call and in what order; instructions in the event of smoke or an odour; manual alarm activation).
  5. Implement compensatory measures

    • Monitor higher-risk areas (garbage rooms, loading rooms and mechanical rooms) with increased attention.
    • Suspend hot work and limit ignition sources while technical protection is reduced.
    • Check the accessibility of exits and evacuation signage daily.
  6. Properly conclude the fire watch

    • Obtain confirmation from the certified technician that the system has been restored.
    • Notify the fire department and insurer that the temporary measures have ended.
    • File the patrol log and reports in the syndicate’s records.

Management tip: integrate these steps into your emergency measures plan and maintenance logbook (EUC). One condominium under our management reduced the duration of its fire watches by 30% simply by standardizing its checklists and internal communications.

Patrol Frequency and Hours of Coverage

The frequency must remain reasonable and proportionate to the risk. In practice, fire watch is maintained continuously for the entire duration that an essential system is unavailable. The patrol covers all identified areas, day and night, with increased attention during periods of lower occupancy. Plan shifts that allow for breaks and safe handovers, without leaving any surveillance “gap.”

Logs, Communication and Insurance: Don’t Overlook Anything

Your fire watch log is proof of due diligence. At a minimum, it should include:

  • The date and time of each round, the route taken and the checkpoints visited.
  • Observed anomalies (a fire door held open, an obstructed exit or a smoke odour) and corrective measures taken.
  • The fire watch officer’s name and signature, incidents or calls placed to 9-1-1, and photos where needed.

Additional best practices:

  • Keep the log in the building’s records together with maintenance and restoration reports.
  • Record the situation and the board’s decisions in the minutes; present a summary at the AGM for transparency and follow-up.
  • Update the maintenance logbook (EUC) and, where necessary, plan major work in the contingency fund to make systems more reliable (e.g., replacing obsolete panels or pumps that have reached the end of their useful life).
  • Ask the insurer about the impact of a prolonged outage and fire watch on coverage conditions and deductibles.

Lastly, make sure corrective work is performed by contractors holding the appropriate RBQ licences and that the required inspection/testing certificates are issued and filed.

Frequently Asked Questions (FAQ)

Q1. Can fire watch be provided by a concierge or security officer who is already on duty?
Yes, if the person is specifically assigned to fire watch during their shift, trained and available without another competing task. If this is not possible, assign dedicated resources.

Q2. How many people are needed for fire watch?
It depends on the building’s height, the number of stairwells, garages and technical areas. The objective is to cover all areas at the defined frequency, 24/7, without interruption.

Q3. Who pays for fire watch and how should it be accounted for?
Costs related to fire watch required for the building’s safety are generally common expenses. They are charged to the operating budget; if the outage results from an insured loss, a claim may be considered depending on the policy.


Useful Resources

  • Safety Code, Chapter VIII – Building (incorporating the NFCC) — LégisQuébec
  • Fire Safety Act — LégisQuébec
  • RBQ — Safety Code (general information)
  • RGCQ — Co-ownership resources and best practices

Take It Further with multiRent

  • Our operations management services (prevention and maintenance)
  • Our administrative management services (communications and records)
  • Pricing and options
  • All our practical articles

This article provides general information and does not constitute legal advice. Consult a lawyer or notary regarding your situation.

Do you manage a condominium in Quebec? Explore our plans or contact us to assess your needs.

Managing your condo building with multiRent

  • Condo management services
  • Condo maintenance logbook

Areas served: South Shore · Montreal · Laval · Longueuil · Brossard · Boucherville · Saint-Constant · Saint-Amable · Saint-Jérôme

Share

Related posts

04/11/2026

Concierge or Outsourced Maintenance in a Co-ownership


Read more
21/10/2026

Mice and Rats in a Co-ownership: Who Pays?


Read more
06/10/2026

Condo Renovation Security Deposits in Quebec


Read more

Comments are closed.

multiRent — Gestion de copropriétés

Services

Administrative management

Financial management

Operations management

Portal

About Us

The multiRent team

Contact us

Notaries

LinkedIn

RGCQCorporate member of the RGCQ

Resources

RGCQ

CORPIQ

Portal
    Manage Consent

    To give you the best possible experience, we use technologies such as cookies to store and/or access information about your device. Consenting to these technologies lets us process data such as browsing behaviour or unique identifiers on this site. Declining or withdrawing your consent may affect certain features.

    Functional Always active
    Technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
    Preferences
    The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
    Statistics
    The technical storage or access that is used exclusively for statistical purposes. Technical storage or access used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your internet service provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
    Marketing
    Technical storage or access is required to create user profiles in order to send advertising, or to track the user across a website or several websites for similar marketing purposes.
    • Manage options
    • Manage services
    • Manage {vendor_count} vendors
    • Read more about these purposes
    Manage preferences
    • {title}
    • {title}
    • {title}