DCC in Quebec Condominiums: EV Charging Stations, Permits and Insurance
In Montreal and on the South Shore, more and more co-owners are considering installing an electric vehicle charging station at home. In a divided co-ownership, a common solution for avoiding an overload of the electrical service is a DCC, often called a branch circuit breaker or load control device. This article provides an overview, up to date as of 2026-09-01, of the permits, insurance and responsibilities to plan for.
Careful planning reduces risks for the syndicate, the board of directors (the board) and co-owners. You will also find a simple process for handling requests and documenting decisions in the AGM minutes.
How does a DCC work in a condominium?
A DCC is a load management device connected between the condo’s meter or panel and the charging station. It measures the unit’s consumption and powers the charging station only when sufficient capacity is available. This often avoids having to increase the amperage of the electrical service.
In practice, the DCC acts as an intelligent branch circuit breaker:
- It prioritizes the condo’s essential loads and sheds the charging station’s load during peak demand.
- It allows the charging station to be connected to the co-owner’s private meter, with simple billing for the electricity consumed.
- It limits work in the common portions compared with supplying power from a common panel.
In an indoor parking garage, the wiring route almost always passes through common portions. Even if the charging station serves a private portion (or an exclusive-use parking space), written authorization from the syndicate is still required.
Permits, the RBQ and electrical compliance in Quebec
The installation of a charging station and a DCC must be carried out by a licensed electrical contractor and comply with the Quebec Construction Code, Chapter V – Electricity. The master electrician assesses the available capacity, selects the appropriate conductor and circuit breaker sizes, and ensures that the differential protection required by the Code is in place.
Key points for the board and manager:
- An electrical work permit/notice is required and issued by the electrical contractor.
- No “temporary” connection may remain in place; the installation must be permanent, compliant and tested.
- Any penetration through fire-rated garage walls requires compliant sealing and the restoration of firestopping.
- A single-line diagram and completion photos should be kept in the maintenance logbook (EUC).
For reference and verification:
- RBQ – Electricity and work requirements: rbq.gouv.qc.ca/domaines-dintervention/electricite
- RBQ – Contractor’s licence: rbq.gouv.qc.ca/licence/obtenir-une-licence
- LégisQuébec – Civil Code of Québec (general co-ownership rules): legisquebec.gouv.qc.ca/CCQ-1991
- RGCQ – Resources and best practices for co-ownership: rgcq.org
Syndicate approvals: the declaration, common portions and the AGM
Before any drilling, the board must review the declaration of co-ownership and the building’s regulations. Most DCC charging station projects involve work in the common portions (routing, anchoring and firestopping). This requires authorization from the syndicate, sometimes in the form of an individual agreement.
Best practices for approvals:
- Require a technical file: load estimate, proposed route, DCC specifications and the electrician’s quote.
- Sign an installation agreement with the co-owner covering maintenance, access for inspections and removal upon sale, if required.
- Clarify the allocation of costs:
- Private equipment (charging station, DCC and dedicated cables): paid by the applicant.
- Work affecting common portions: paid by the applicant, unless the AGM decides otherwise.
- Consumption measurement: through the condo’s meter or an approved submeter.
- Update the regulations to establish minimum specifications (amperage, wiring, protection, conduit colour and cable management).
The board’s decision must be documented and, where necessary, ratified at the AGM if a substantial modification to the common portions is contemplated. Everything is recorded in the minutes, along with the conditions imposed, plans and responsibilities.
Insurance: who covers what?
A charging station and DCC add equipment and penetrations to the common portions. The syndicate should notify its insurer and check whether endorsements are required for the additional risks (fire, damage and civil liability in the garage).
- The co-owner remains responsible for private equipment and must notify their home (condo) insurer of the addition of a charging station and DCC.
- The syndicate retains responsibility for the common portions. The agreement may transfer certain restoration costs to the co-owner if the equipment causes damage.
- Require the contractor to provide proof of liability insurance and applicable warranties for the work.
Consult the Civil Code of Québec for the principles governing the allocation of expenses and responsibilities between co-owners and the syndicate. Also refer to the RGCQ’s practical guides to align your regulations.
Recommended process for the board and FAQ
Recommended steps
- Written request from the co-owner
Standardized form submitted to the syndicate with a project description, DCC model and parking location.
- Technical assessment
Capacity verification by a master electrician, with a written estimate and diagram.
- Conditional approval from the board
Approval letter specifying the conditions: RBQ compliance, firestopping, routing, conduit colour and access.
- Installation agreement
Agreement signed by the co-owner and syndicate covering maintenance, access, removal, transfer upon sale, liability, insurance and costs.
- Work and compliance
Work performed by a licensed contractor; electrical permit; testing; submission of completion documents (photos, certificate and detailed invoice).
- Document updates
Addition to the maintenance logbook / EUC; recording in the board’s minutes; if necessary, information provided at the next AGM.
- Operation and maintenance
Periodic visual inspection; testing of differential protection; maintaining clearances; procedure in the event of a malfunction.
For tools and support, see our operations management and administrative management services. We also offer up-to-date resources on our blog.
FAQ
Q1. DCC or an electrical service upgrade?
A DCC is appropriate when the existing capacity is sufficient most of the time. An upgrade is required if the load study shows a chronic shortfall or if several charging stations will be connected to the same panel without centralized management.
Q2. Who pays for what?
Generally, equipment and work specific to the project are paid by the co-owner. Common costs are paid by the syndicate only if the AGM authorizes them. The installation agreement must specify everything clearly in writing.
Q3. What if several co-owners request a charging station?
The board may require a charging master plan, with shared charging stations supplied from the common electrical service and centralized load management. An individual DCC remains possible, but overall capacity, ventilation and fire safety must guide the decision.
This article provides general information and does not constitute legal advice. Consult a lawyer or notary regarding your specific situation.
This article provides general information and does not replace advice from a tax professional or accountant. Refer to Revenu Québec and the CRA for the exact rules.
Do you manage a condominium in Quebec? Discover our packages or contact us to assess your needs.
