multiRent — Gestion de copropriétésmultiRent — Gestion de copropriétésmultiRent — Gestion de copropriétésmultiRent — Gestion de copropriétés
  • Services
  • Packages
  • Changing managers
  • Partners
  • Our team
  • Blog
  • Contact
  • Français
Portal
✕
08/09/2026
Categories
  • Operations Management
Tags
  • Board of Directors
  • Common Portions
  • Maintenance Logbook
  • Preventive Maintenance
  • Quebec

CNESST Confined Spaces in Quebec Condominiums: Requirements

By Muriel Druart, Client services director

Managing a confined space in a divided co-ownership is about more than maintenance. It is first and foremost an occupational health and safety issue governed by the CNESST. A storm drain, crawl space, sump, tank or pump room may present serious risks (lack of oxygen, gases, drowning, residual energy). As a syndicate of co-owners and board of directors (the board), you have responsibilities when workers access these locations.

In this article (updated as of 2026-09-08), we summarize what a confined space is, who is responsible for what between the syndicate and the contractor, and the specific requirements before, during and after the work. We also suggest practices suited to condominiums in the Greater Montreal area to help integrate these requirements into your maintenance logbook (EUC) and administrative processes.

What is a confined space in a condominium?

A confined space is a totally or partially enclosed location that is not designed for occupancy, has limited access openings and insufficient ventilation to control contaminants. It often involves risks of asphyxiation, poisoning, falls, burial, electrocution or drowning.

Common examples in condominiums include:

  • A poorly ventilated crawl space.
  • A sewer manhole, valve chamber or garage sump.
  • A stormwater tank, retention basin or access hatch to a pipe.
  • Enclosed ducts and mechanical chambers not intended for occupancy.

Conversely, a regular mechanical room designed for occupancy and properly ventilated is generally not a confined space. However, each building must carry out a formal assessment, since the layout, ventilation and uses vary.

For legal references, consult the Act respecting occupational health and safety (AOHS) and the Regulation respecting occupational health and safety (ROHS), which set out the requirements relating to confined spaces and prevention methods (gas detection, lockout, entry permits, rescue, etc.).

Who is responsible for what (syndicate, principal contractor, contractor)?

  • Syndicate/board (client, owner): must identify confined spaces located in the common portions, disclose known hazards, control access, require an entry permit and safe procedures, and coordinate safety when several employers are working on the site.
  • Principal contractor (if designated for a construction site involving several employers): coordinates the implementation of safety measures for all work in the construction area.
  • Contractor/employer: develops and applies confined-space entry procedures, trains workers, provides equipment (detectors, ventilation, PPE, tripod/harness), issues and signs the entry permit, performs atmospheric testing and implements a rescue plan.

In practice, in a condominium, the syndicate remains responsible for controlling access to the common portions and ensuring that the selected contractor is competent and licensed, and that it will comply with the ROHS. Select qualified contractors who can demonstrate their confined-space procedures and lockout program.

Before entry: inventory, signage, permits and lockout

  1. Prepare an inventory of confined spaces
    • Map potential confined spaces (plans, photographs and access points).
    • Document known hazards (gas, water, energy and falls) and the control measures.
    • Integrate the inventory into your maintenance logbook/EUC and the building’s technical file.
  2. Restrict and identify access
    • Lock hatches and covers, and post clear “Restricted Access – Confined Space” signage.
    • Define who holds the keys and maintains the entry log.
  3. Select the contractor
    • Require a valid RBQ licence and a written confined-space entry procedure, including gas detection, ventilation and rescue.
    • Request workers’ training certificates and proof that detectors are maintained.
  4. Prepare the work with an entry permit
    • The confined-space entry permit describes the risks, required atmospheric testing, PPE, monitoring, communications and rescue plan. It must be completed and posted at the access point.
    • Ensure that hazardous energy has been neutralized (lockout/isolation), water flows have been isolated and ventilation has been planned.
    • Share relevant information held by the syndicate (plans, technical data sheets and gas/water histories) and attach it to the permit.
  5. Internal governance
    • The board may adopt a procedure or building by-law governing confined-space access, with traceability (forms, signatures and document retention).
    • Add the matter to the AGM agenda as needed and record decisions in the minutes.

For support, see our operations management services, including contractor coordination and record-keeping: https://www.multirent.ca/services/#gestion-des-operations. For process and document compliance, our team can structure your administrative templates: https://www.multirent.ca/services/#gestion-administrative.

During the work: testing, monitoring, communications and rescue

  • Atmospheric testing: before and during entry, the contractor measures O2, LEL (explosive gases) and contaminants (e.g., H2S and CO) using a calibrated detector. Entry is prohibited if readings are not safe.
  • Ventilation: use adequate mechanical ventilation to maintain breathable air and control contaminants.
  • Energy and fluid control: implement lockout and isolation to prevent the entry of water, electricity, pumps or other energy sources.
  • Monitoring: a qualified attendant remains outside, in constant contact with the people inside and ready to activate the emergency plan.
  • Communications: provide reliable means (radio, wired communication or signals) suited to the space.
  • Emergency and rescue equipment: harnesses, lifelines, a tripod or retrieval device, and first-aid kits. The rescue plan must be feasible without exposing other people to hazards.
  • Access control: limit the number of people and prevent co-owners or visitors from approaching the work area.
  • Weather and conditions: account for rain, possible backflow and seasonal variations in garages and sumps.

The attendant records the measures taken and test results on the permit. Any hazardous condition requires the work to stop and the plan to be reassessed.

After the work: closure, reports and maintenance logbook follow-up

  • Safe closure: remove the equipment, remove lockout devices in the prescribed order, and verify the integrity of covers and barriers.
  • Traceability: retain the entry permit, test results, list of workers present and any incidents or deviations observed.
  • Document update: update the maintenance logbook/EUC, the confined-space inventory and, if necessary, your internal procedures. Incorporate the lessons learned into the next call for tenders.
  • Feedback to the board and manager: a short report to the board and archiving in the co-ownership file facilitate future planning and inspections.

A syndicate we support reduced emergency interventions by grouping sump cleaning and the annual inspection, with a standardized permit, dedicated portable ventilation and harmonized lockout procedures for all contractors.

Quick checklist (adapt to your building)

  • Have you identified and mapped the confined spaces in the common portions?
  • Are access points controlled and clearly marked?
  • Does your call for tenders require an entry permit, gas detection and a rescue plan?
  • Does the contractor have a lockout program and calibrated detectors?
  • Has an attendant been designated and trained? Have communications been tested?
  • Are the documents retained and integrated into your EUC/maintenance logbook?

FAQ

Q1. Is a crawl space always a confined space?
Often, yes, because it is poorly ventilated and access is restricted. A technical assessment is required, along with atmospheric testing and, if necessary, an entry permit.

Q2. Can the syndicate’s superintendent enter a confined space?
Only if their employer provides the required training, equipment, procedures and permit. Otherwise, assign these tasks to a competent contractor.

Q3. Do we have to notify the CNESST before every entry?
The law mainly requires the employer to apply the measures set out in the ROHS (permit, testing, monitoring and rescue). Prior notification is not systematic, but violations are subject to penalties.

Useful sources

  • Act respecting occupational health and safety (AOHS)
  • Regulation respecting occupational health and safety (ROHS)
  • Safety Code for the Construction Industry
  • Hiring a licensed contractor (RBQ)

This article provides general information and does not constitute legal advice. Consult a lawyer or notary for advice regarding your situation.

Do you manage a condominium in Quebec? Discover our packages or contact us to assess your needs.

Managing your condo building with multiRent

  • Condo management services
  • Condo maintenance logbook
  • Condo management pricing

Areas served: South Shore · Montreal · Laval · Longueuil · Brossard · Boucherville · Saint-Constant · Saint-Amable · Saint-Jérôme

Share

Related posts

04/11/2026

Concierge or Outsourced Maintenance in a Co-ownership


Read more
21/10/2026

Mice and Rats in a Co-ownership: Who Pays?


Read more
06/10/2026

Condo Renovation Security Deposits in Quebec


Read more

Comments are closed.

multiRent — Gestion de copropriétés

Services

Administrative management

Financial management

Operations management

Portal

About Us

The multiRent team

Contact us

Notaries

LinkedIn

RGCQCorporate member of the RGCQ

Resources

RGCQ

CORPIQ

Portal
    Manage Consent

    To give you the best possible experience, we use technologies such as cookies to store and/or access information about your device. Consenting to these technologies lets us process data such as browsing behaviour or unique identifiers on this site. Declining or withdrawing your consent may affect certain features.

    Functional Always active
    Technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
    Preferences
    The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
    Statistics
    The technical storage or access that is used exclusively for statistical purposes. Technical storage or access used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your internet service provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
    Marketing
    Technical storage or access is required to create user profiles in order to send advertising, or to track the user across a website or several websites for similar marketing purposes.
    • Manage options
    • Manage services
    • Manage {vendor_count} vendors
    • Read more about these purposes
    Manage preferences
    • {title}
    • {title}
    • {title}