multiRent — Gestion de copropriétésmultiRent — Gestion de copropriétésmultiRent — Gestion de copropriétésmultiRent — Gestion de copropriétés
  • Services
  • Packages
  • Changing managers
  • Partners
  • Our team
  • Blog
  • Contact
  • Français
Portal
✕
08/09/2026
Categories
  • Operations Management
Tags
  • Maintenance Logbook
  • Preventive Maintenance
  • Quebec

CSA B52 for Quebec Condominiums: A2L Refrigeration (R‑454B)

By Muriel Druart, Client services director

The transition to A2L refrigerants, such as R‑454B, now affects most replacements of air-conditioning units and heat pumps in divided co-ownerships. In Quebec, the technical framework is based on CSA B52 (Mechanical Refrigeration Code), as incorporated into the RBQ regulatory framework. For a board of directors, understanding these requirements helps avoid stalled projects, unexpected costs and non-compliance.

This article explains, in practical terms, what CSA B52 means for co-ownerships, how to plan work involving A2L refrigerants (including R‑454B), and which decisions the syndicate must document at the AGM, in the minutes and in the maintenance logbook/EUC. You will also find a short roadmap for budgeting through the contingency fund and coordinating common portions and private portions.

CSA B52 and the Quebec framework: the essentials for your board

  • CSA B52 is the technical code of reference for the design, installation, operation and maintenance of refrigeration and air-conditioning systems. In Quebec, it is taken into account through regulations overseen by the RBQ and the Building Act.
  • In practical terms, any significant modification to a system using a refrigerant (replacement of a rooftop unit, central heat pump, VRF system, etc.) must be designed and installed in accordance with CSA B52 by a contractor holding the appropriate RBQ licence. An engineer may be required for the design, depending on the scope and location of the equipment.
  • Compliance must be assessed as early as the tendering stage: refrigerant charges, ventilation, detection, room volumes, piping lengths, emergency shut-off devices, labelling and maintenance access.

Useful references in Quebec:

  • LégisQuébec – Building Act (B‑1.1)
  • LégisQuébec – Quebec Construction Code, Chapter I – Building (regulation)
  • RBQ – Homepage and technical information
  • RBQ – Contractor licences (relevant categories and subcategories)

A2L (R‑454B, R‑32) in condominiums: risks, charge limits and ventilation

A2Ls are “mildly flammable” refrigerants. R‑454B is gradually replacing R‑410A in many types of equipment. CSA B52 governs their use in connection with the safety of occupants and workers.

What your syndicate must monitor:

  • Charge limits and room volume: the total amount of refrigerant per circuit is limited according to the volume of occupied spaces. The higher the charge, the more mitigation measures are required (e.g., detection, automatic shut-off and mechanical ventilation).
  • Piping routes and lengths: piping passing through corridors, shafts or common portions must comply with B52 requirements (protection, continuity, supports and fire-rated penetrations). Extending piping to serve a more distant unit may result in non-compliance.
  • Approved equipment: units must be certified according to the applicable standards (e.g., CAN/UL), be A2L-compatible and be installed in accordance with the manufacturer’s instructions. No refrigerant substitution is permitted.
  • Ventilation and detection: depending on the configuration and charge, detectors and exhaust ventilation may be required, particularly in mechanical rooms or enclosed spaces where a release could accumulate.
  • Electrical systems and emergency shut-off: shut-off devices, signage and access to electrical disconnects must comply with the requirements; this applies to roofs, mechanical rooms and technical rooms accessible to personnel.

Typical mitigation measures to validate

  • Reducing charges per circuit or dividing systems by zone.
  • Refrigerant detectors connected to the emergency shut-off and ventilation systems.
  • Reconfiguring piping routes to limit penetrations through refuge areas.
  • Mechanical and firestopping protection at penetrations through slabs and fire-rated walls.
  • Standardized circuit labelling, up-to-date diagrams and a maintenance register.

Work and compliance: responsibilities of the board and co-owners

In divided co-ownerships, air conditioning may involve common portions (e.g., the roof, mechanical rooms and technical shafts) and private portions (indoor units and minor penetrations). The declaration of co-ownership and the building’s regulations often determine what is permitted and who pays for what.

  • Authorizations and resolutions: for work affecting common portions, the board must authorize the work, sometimes through an AGM resolution depending on its scope and budget. Record the decision in the minutes and attach the plans, specifications and certificates.
  • RBQ-licensed contractors: require proof of the appropriate licence and insurance and, where necessary, the involvement of an engineer. Request technical data sheets confirming A2L compatibility and charge limits.
  • Coordination between units: a unit-by-unit replacement that changes line length can affect several condominiums. Avoid case-by-case approaches when a common system serves several private portions; coordinate through the syndicate.
  • Municipal permits: depending on the municipality, a permit may be required for a rooftop replacement or the addition of an outdoor unit. Confirm this before committing to any expenses.
  • Post-work certificates: retain the installation certificate, pressure and leak-test results and commissioning documentation, and add them to the maintenance logbook/EUC and technical file.

To structure the process, one syndicate we support adopted a simple procedure: an application form completed by the co-owner, a technical review by the manager with the RBQ contractor, board authorization, and then standardized receipt and archiving of the documents.

Mechanical rooms and rooftop equipment: inspection points

In condominiums with central refrigeration, centralized heat pumps, VRF systems or rooftop units, CSA B52 imposes more structured requirements.

  • Mechanical room: fire resistance, exhaust ventilation, detection where required, doors that open outward, lighting and safe access. The potential accumulation of an A2L is a particular consideration.
  • Roof: clearances around equipment, safe access, anchors and guardrails according to the applicable standards; emergency shut-off signage and clearly visible identification plates.
  • Condensate and drainage: drainage routes that avoid damage to common portions; tracing and insulation where necessary.
  • Noise and vibration: compliance with the building’s regulations to preserve peace and quiet and avoid complaints; appropriate supports and vibration isolators.
  • Maintenance and access: access to filters, valves and instruments must allow for safe maintenance, without dismantling anything that could damage firewalls or common finishes.

Governance tip: require “as-built drawings” and a simple diagram posted in the mechanical room. In the event of a loss or alarm, the technician will know where to intervene quickly.

The syndicate’s action plan: EUC, budget and communication

To transition to A2Ls smoothly, structure your approach into seven steps.

  1. Map the systems

    • Prepare an inventory of the equipment (make, model, refrigerant, year and charge). Identify piping that passes through common portions.
  2. Verify CSA B52 compliance

    • Have the systems reviewed by an RBQ contractor and, if required, an engineer. Validate A2L charges, ventilation, detection, emergency shut-off and access.
  3. Update the maintenance logbook / EUC

    • Add technical data sheets, plans, leak tests and maintenance procedures. Define preventive maintenance frequencies and seasonal inspections.
  4. Set requirements for individual requests

    • Create a standard form and guide explaining CSA B52 requirements, charge limits and authorizations. Refer to the declaration of co-ownership and the building’s regulations.
  5. Plan the budget and contingency fund

    • Include anticipated replacements, ventilation and detection upgrades, and related roofing work. Assess the impact on condo fees/common expenses and special assessments, as needed.
  6. Document matters for the board, AGM and minutes

    • Present the current situation, risks and costs. Have the guidelines and authorization parameters for A2L projects adopted. Record them in the minutes and provide them to the co-owners.
  7. Choose your partners

    • Select RBQ contractors experienced with A2Ls and CSA B52. Specify the deliverables (plans, tests, commissioning and final drawings) in the tender documents.

To equip your team, see our operations management and planned maintenance services: multiRent services – operations management. To compare service levels, see our packages. You can also browse our blog for other practical guides.

FAQ – CSA B52 and A2Ls in condominiums

Q1. Can a co-owner replace their heat pump with an R‑454B unit on their own?
– Yes, if the declaration of co-ownership and the building’s regulations permit it AND if the installation complies with CSA B52. Any modification affecting common portions or increasing the refrigerant charge in common spaces requires the syndicate’s authorization and, where necessary, a permit.

Q2. Do we need to install refrigerant detectors for every A2L project?
– Not necessarily. It depends on the charge, room volume and location of the equipment. CSA B52 establishes thresholds and mitigation measures. A professional assessment is required before making a decision.

Q3. Who pays if common work is required to remain compliant (e.g., mechanical-room ventilation)?
– As a general rule, work in common portions falls under the syndicate’s responsibility and is covered by common expenses or the contingency fund. However, if an individual project triggers the work, the allocation of costs may be governed by the declaration of co-ownership, a policy adopted at an AGM or a specific agreement.

Additional references and best practices:

  • RBQ – Homepage (technical information and bulletins)
  • RBQ – Contractor licences (verify the category)
  • RGCQ – Resources for syndicates and boards
  • LégisQuébec – Building Act (B‑1.1)

This article provides general information and does not constitute legal advice. Consult a lawyer or notary regarding your specific situation.

Do you manage a condominium in Quebec? Discover our packages or contact us to assess your needs.

Managing your condo building with multiRent

  • Condo management services
  • Condo maintenance logbook
  • Condo management pricing

Areas served: South Shore · Montreal · Laval · Longueuil · Brossard · Boucherville · Saint-Constant · Saint-Amable · Saint-Jérôme

Share

Related posts

04/11/2026

Concierge or Outsourced Maintenance in a Co-ownership


Read more
21/10/2026

Mice and Rats in a Co-ownership: Who Pays?


Read more
06/10/2026

Condo Renovation Security Deposits in Quebec


Read more

Comments are closed.

multiRent — Gestion de copropriétés

Services

Administrative management

Financial management

Operations management

Portal

About Us

The multiRent team

Contact us

Notaries

LinkedIn

RGCQCorporate member of the RGCQ

Resources

RGCQ

CORPIQ

Portal
    Manage Consent

    To give you the best possible experience, we use technologies such as cookies to store and/or access information about your device. Consenting to these technologies lets us process data such as browsing behaviour or unique identifiers on this site. Declining or withdrawing your consent may affect certain features.

    Functional Always active
    Technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
    Preferences
    The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
    Statistics
    The technical storage or access that is used exclusively for statistical purposes. Technical storage or access used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your internet service provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
    Marketing
    Technical storage or access is required to create user profiles in order to send advertising, or to track the user across a website or several websites for similar marketing purposes.
    • Manage options
    • Manage services
    • Manage {vendor_count} vendors
    • Read more about these purposes
    Manage preferences
    • {title}
    • {title}
    • {title}