Legionella in Condo Hot Water Systems in Quebec: What to Do
Managing domestic hot water in a divided co-ownership is about more than comfort. It is also a public health and compliance issue. The Legionella bacterium can develop in poorly maintained hot water systems and cause legionellosis. In the Greater Montreal area, syndicates and their board of directors (the board) must know the best practices for reducing risks and establishing a maintenance plan.
This article, updated as of 2026-09-06, guides you through the applicable Quebec framework, essential technical parameters and practical measures to include in your maintenance logbook / EUC.
Legionella and domestic hot water: understanding the risk
Legionella is a bacterium that proliferates in lukewarm, stagnant water, especially between 25 °C and 45 °C. It can colonize tanks, hot water loops, little-used pipes, showerheads and aerators. Transmission occurs by inhaling contaminated aerosols, such as those produced in the shower.
- Factors that promote proliferation:
- Poorly controlled temperatures (tank too cool, insufficient recirculation).
- Stagnation (dead sections, unoccupied units, rarely used fixtures).
- Scale and biofilm in pipes, showerheads and mixing valves.
- People at greater risk: older adults, immunocompromised people and people with respiratory diseases.
Cooling towers are often mentioned when legionellosis is discussed. However, domestic hot water systems in condos can also be a potential source if maintenance and temperatures are not properly controlled.
Quebec framework and the responsibilities of the syndicate and the board
In Quebec, the syndicate is responsible for preserving the building and protecting co-owners. The Civil Code of Québec assigns the syndicate, through the board, the administration and maintenance of the common portions, which includes common hot water systems (see s. 1039 C.C.Q.; see the Civil Code on LégisQuébec). Your declaration of co-ownership and building regulations may specify certain responsibilities and access to private portions for essential inspections.
- Key issues for the board:
- Determine who is responsible for the hot water system (common or private portion).
- Document maintenance frequencies and technical instructions in the maintenance logbook / EUC.
- Use qualified and licensed contractors when necessary.
Plumbing and safety requirements come primarily from the codes applicable in Quebec and operational recommendations from the Régie du bâtiment du Québec (RBQ). Without citing fixed thresholds for every building, the principles are intended to maintain temperatures that discourage Legionella while preventing burns at points of use.
- Useful references:
- Civil Code of Québec on LégisQuébec (the syndicate’s obligations and administration of the common portions).
- RBQ recommendations for domestic hot water and burn prevention.
- Construction and safety codes applicable to the building and plumbing.
Essential technical parameters to monitor
Every co-ownership has its own configuration (centralized production, recirculation loops, mixing valves, risers, individual appliances, etc.). The parameters below are commonly accepted benchmarks in the field and are reflected in RBQ guidance and professional practice.
- Generally recommended target temperatures:
- Hot water tank: aim for 60 °C in the tank to limit bacterial proliferation.
- Recirculation loop: maintain approximately 55 °C to preserve the thermal effect through the risers.
- Points of use: limit the temperature delivered to occupants, often to 49–50 °C, using thermostatic mixing valves to prevent burns.
- Balancing and recirculation:
- Check hydraulic balancing so that all risers receive the proper temperature.
- Make sure recirculation pumps and backflow preventers are working properly.
- Appliance hygiene:
- Scale and biofilm: periodically descale showerheads, aerators and mixing valves.
- Dead sections: identify and remove “dead legs” whenever possible.
- Rarely used points:
- Establish periodic flushing cycles in unoccupied units or rarely used common rooms.
Thermal disinfection and sampling
- Thermal disinfection: when necessary, some co-ownerships plan controlled temperature increases to sanitize the system. This operation must be designed and supervised by a qualified contractor to prevent burns and ensure effectiveness.
- Sampling: an analysis program may be required depending on the level of risk, history or presence of vulnerable users. The frequency should be determined with a laboratory and specialist, generally on a periodic basis (for example, annually or semi-annually for higher-risk sites).
Establishing a prevention plan suited to your building
A clear prevention plan should be incorporated into your maintenance logbook / EUC. It must specify who does what, when and how. Here is a simple structure to adapt:
- Map the system
- Diagram the production system (boiler/tank), loops, risers, valves and critical points.
- Locate little-used sections and areas prone to scale.
- Parameters and controls
- Define target temperatures at the tank, loop return and points of use.
- Set up a periodic measurement log (calibrated thermometer and simple protocols).
- Preventive maintenance
- Schedule recirculation pump maintenance, mixing valve inspections, descaling and flushing of rarely used points.
- Periodically clean/replace showerheads and aerators in the common portions; provide recommendations to co-owners for private portions.
- Corrective measures
- Establish a procedure for temperature deviations, equipment failures or non-compliant analysis results.
- Escalation: notify occupants, impose temporary restrictions (e.g., avoid showers) and document emergency intervention.
- Training and communication
- Instruction sheets for the caretaker or contractor.
- Template newsletter to co-owners reminding them of best practices (allow water to heat, report temperature problems and clean showerheads).
- Documentation
- Keep temperature readings, work orders, analyses and board/AGM minutes related to technical decisions.
To develop this plan, your board can rely on an experienced manager. See our operations management and administrative management services to structure inspections, records and supplier follow-ups.
Incidents, communication and traceability
When a risk is suspected (insufficient temperatures, a complaint about lukewarm shower water or concerning analysis results), acting quickly and communicating in a structured manner can make a difference.
- Possible immediate measures:
- Check and correct temperatures at the tank and loop return.
- Issue a temporary notice to occupants about shower use if required.
- Mandate a qualified contractor to diagnose recirculation and balancing.
- Communication and records:
- Inform co-owners of the measures taken, timelines and precautions.
- Document every step and record decisions in the board minutes.
- Present a report at the next AGM, with an update to the maintenance logbook / EUC.
Depending on the building’s configuration, some interventions will affect common portions (boiler room, recirculation system and risers), while others will affect private portions (mixing valves in units). The declaration of co-ownership and building regulations govern access and the division of responsibilities. When improvement work is required (e.g., adding thermostatic mixing valves), plan the expense in the operating budget or as a major project, depending on its scope.
Best practices for the board and the syndicate
- Appoint a domestic hot water officer within the board or management team.
- Establish and record a routine for measuring temperatures at representative points.
- Have a licensed contractor annually check the condition of pumps, valves, mixing valves and the system’s balancing.
- Implement a preventive flushing procedure for unoccupied units and common rooms.
- Review the prevention plan annually and update it in the maintenance logbook / EUC.
For inspiration and the latest co-ownership news, visit our blog. If your syndicate wants additional tools, our services also cover contractor coordination and document management.
Useful references (for consultation)
- Civil Code of Québec – LégisQuébec (the syndicate’s obligations; administration of the common portions).
- RBQ – Domestic hot water, burn prevention and legionellosis (technical and safety recommendations).
- RBQ – Information on legionellosis prevention and maintenance best practices.
- RGCQ – Resources and best practices in co-ownership management.
Frequently asked questions
Q. What temperature should the tank be set to in order to limit Legionella without creating a burn risk?
A. Aiming for 60 °C in the tank is a widespread recommendation, while limiting the temperature delivered at points of use to approximately 49–50 °C through thermostatic mixing valves. Have a professional validate these parameters based on your configuration.
Q. Does the condo’s water have to be tested every year?
A. There is no single frequency for every building. The decision depends on the level of risk, history and presence of vulnerable users. Develop a program with a laboratory and specialist, and incorporate it into your maintenance logbook / EUC.
Q. Are cooling towers the only Legionella concern?
A. No. Domestic hot water systems can also be affected if temperatures and maintenance are inadequate. Both systems require prevention measures proportionate to the risk.
This article provides general information and does not constitute legal advice. Consult a lawyer or notary for advice about your situation.
Do you manage a co-ownership in Quebec? Discover our packages or contact us to assess your needs.
